|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Scan-Speak speaker break-in question. posted by manx on May 15, 2000 at 09:26:51:
Hi there,Yes, I'd go along here. Use the 8545 for what it's good for, as woofer. Add a suitable Midrange and use a fairly wideband unit here....
You should be able to put together something that will cover around 250Hz - 5kHz without X-Over. Look at 4" and 5" Seas Papercones as used by Audiophysics.... BTW, if you trick this out right you can avoid having to use any diffraction loss correction for Midrange.
I personally would sugget you look at the Avanti or something similar for ideas. The 8545's would easily get down to cover 30Hz.
Later Thorsten
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Scan-Speak speaker break-in question. - Thorsten 09:46:38 05/15/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]