RE: For anyone who thinks the AT33PTG needs a light arm

Posted by charlies824 (A) on October 9, 2007 at 14:28:28

In Reply to: RE: For anyone who thinks the AT33PTG needs a light arm posted by John Elison on October 9, 2007 at 13:47:24:

I was mostly just guessing based on the HFN test record results I got for Shure V15VxMR, Grado Red, and Denon 301II cartridges on this arm. Since the 14 Hz HFN frequency is really 12 or so Hz, your calculation of no higher than 10 Hz sounds about right. I'll let you know.

Charles S.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - For anyone who thinks the AT33PTG needs a light arm - Audio Fan 10:03:51 10/09/07 (12)

RE: For anyone who thinks the AT33PTG needs a light arm - charlies824 10:56:32 10/09/07 (11)

RE: For anyone who thinks the AT33PTG needs a light arm - John Elison 13:47:24 10/09/07 (9)

RE: For anyone who thinks the AT33PTG needs a light arm - charlies824 14:28:28 10/09/07 (1)

You were right: lateral resonance freq = 10 Hz nt - charlies824 13:04:08 10/11/07 (0)

RE: For anyone who thinks the AT33PTG needs a light arm - Audio Fan 13:51:14 10/09/07 (6)

RE: For anyone who thinks the AT33PTG needs a light arm - John Elison 17:35:36 10/09/07 (2)

RE: For anyone who thinks the AT33PTG needs a light arm - Audio Fan 04:50:59 10/10/07 (1)

RE: For anyone who thinks the AT33PTG needs a light arm - John Elison 06:36:58 10/10/07 (0)

it is probably what they have overstock on and - mattjk 14:58:48 10/09/07 (2)

RE: it is probably what they have overstock on and - Audio Fan 16:01:38 10/09/07 (1)

of course, how many tables out there can actually - mattjk 16:20:45 10/09/07 (0)

RE: For anyone who thinks the AT33PTG needs a light arm - Audio Fan 12:22:20 10/09/07 (0)

Follow Ups

RE: For anyone who thinks the AT33PTG needs a light arm - charlies824 14:28:28 10/09/07 (1)

You were right: lateral resonance freq = 10 Hz nt - charlies824 13:04:08 10/11/07 (0)

RE: For anyone who thinks the AT33PTG needs a light arm

Post a Message!