Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Vinyl Asylum ]

---

[ Alert Moderator ]

---

RE: For anyone who thinks the AT33PTG needs a light arm

Posted by Audio Fan (A) on October 9, 2007 at 12:22:20

In Reply to: RE: For anyone who thinks the AT33PTG needs a light arm posted by charlies824 on October 9, 2007 at 10:56:32:

>> I'll report back my findings. I expect the resonance frequency to be ~14 hz.

Although I'll be interested to hear your results, that doesn't address my point. I don't believe your arm has a removable headshell, but let's pretend for a minute that it does. If you had ordered an AT33 Reference instead of a Prestige, you would have received the matching headshell, which weighs 23 or 27g mounted. If you used the matching AT headshell, your 5g arm would have an effective masss of about 25 or 30g. Yet in the Vinyl Asylum, the common advice is not to use an AT33 in a medium or high mass arm. My point is, obviously Audio Technica does not agree that the AT33's need a low mass arm.

I can only speculate that they value structural integrity more highly than they value low mass and a resonance in the theoretically ideal range.

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---