![]() |
Radio Road Which tuner to get and getting the most from it. Thank God, for the radio! |
Register / Login
|
In Reply to: FM-3 hum is back and question about impedances. posted by ltman on March 9, 2024 at 08:20:43:
jumping in mid thread the 40/40/20/20 sounds like a tube equipment?.
If you want a quick fix, get two modern 40 or 50mf electrolytic caps with the same Voltage rating and solder these right onto the lugs of the existing cap and ground (watch polarity!). Use some heat shrink if needed but "back then" neat wiring was normally "enough insulation".
Oh the issue is the old electrolytic caps tended to dry out and the MFD goes down and the die-electric liquid goes away.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: FM-3 hum is back and question about impedances. - tomservo 17:51:56 05/18/24 (1)
- RE: FM-3 hum is back and question about impedances. - ltman 21:16:44 07/11/24 (0)