RE: changing to lower output capacitor value in preamp

Tech Square

Technical and speculative discussion of amps, cables and other topics.

In Reply to: changing to lower output capacitor value in preamp posted by jtay008@bigpond.com on April 9, 2008 at 15:52:42:

You may loose some bass. The design requires 2 uf to present the full range of frequencies. I would stay with the 2 uf if you upgrade. Changing to a 1 uf will not cause damage and you will not need to change any resistors. Another option is to use two 1 uf capacitors hooked in parellel, which equals 2 uf.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Follow Ups Full Thread

Topic - changing to lower output capacitor value in preamp - jtay008@bigpond.com 15:52:42 04/09/08 (2)

RE: changing to lower output capacitor value in preamp - morrowaudio 19:07:56 04/09/08 (1)

Whut he sez, approximately. - Poindexter 17:52:05 04/19/08 (0)

Follow Ups

RE: changing to lower output capacitor value in preamp - morrowaudio 19:07:56 04/09/08 (1)

Whut he sez, approximately. - Poindexter 17:52:05 04/19/08 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.