In Reply to: Re: Hartke HA3500 posted by STUART on April 21, 2006 at 07:02:59:
OK it's working now! Problem was I forgot to install a board mounting screw that is down between the main filter caps. This resulted in a missing ground connection. So, the amp worked with the resistor load because the resistor load was connected to the o-scope which is grounded.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Hartke HA3500 - Tiny Daddy 08:28:40 04/21/06 (0)