|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: Novacron problem posted by rhinohifi714 on December 7, 2024 at 08:35:24:
Novacrons all have a fuse for each power tube. The original run with 2 controls (Bias and DC Offset) have the fuses beneath the bottom cover.
That was inconvenient! We later moved the output tube fuses to the rear panel. Novacrons that are set up this way have a total of 7 fuses on the rear panel as a result; 3 on one side of the IEC connector and 4 on the other side. Obviously the 3 on one side are not fuses for the tubes.
If a tube fuse blew, you won't be able to balance the meter, and from your description it sounds like you have a later Novacron with 4 bias controls in front of the driver tubes.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Make sure all your fuses are good. - Ralph 10:41:27 12/10/24 (2)
- Ralph, your stuff is consistently beautiful (nt) - Chip647 15:19:23 12/21/24 (0)
- RE: Make sure all your fuses are good. - rhinohifi714 11:50:26 12/10/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
