Hi everyone,
wondering if anyone has built Bert's DIY horn/OB speaker system called Orphean.
He recommends using 4 x Beyna 15P80Fe/N bass drivers on Open Baffle that he calls the Revelation, link below. Back in 2017 he was recommending 12" drivers now the Beyna 15".
On the HF portion Bert recommends the BMS 4592ND 2" compression driver. Bert recommends active crossover, DSP, and SS amps which he says integrate well between bass & HF horn.
Has anyone built this system and what their thoughts were.
Regards
Johno
This post is made possible by the generous support of people like you and our sponsors:
Topic - BD-Design Orphean - Johno 19:05:08 07/24/23 (29)
- I have the Orphean Horns ...... - Cut-Throat 15:09:02 07/25/23 (8)
- RE: I have the Orphean Horns ...... - Johno 17:14:27 07/25/23 (7)
- RE: I have the Orphean Horns ...... - Cut-Throat 17:21:34 07/25/23 (6)
- RE: I have the Orphean Horns ...... - Johno 18:02:28 07/25/23 (5)
- RE: I have the Orphean Horns ...... - Cut-Throat 18:33:46 07/25/23 (4)
- How does that M5 xover work? - Rod M 19:22:51 07/25/23 (1)
- RE: How does that M5 xover work? - Cut-Throat 23:11:20 07/25/23 (0)
- RE: Ok got it - Orphean Horns ...... - Johno 19:21:58 07/25/23 (1)
- RE: Ok got it - Orphean Horns ...... - Cut-Throat 05:00:57 07/26/23 (0)
- RE: BD-Design Orphean - Don Reid 08:10:04 07/25/23 (19)
- RE: BD-Design Orphean - doug s. 19:00:29 09/10/24 (0)
- RE: BD-Design Orphean/AER - belyin 10:23:27 07/25/23 (9)
- RE: BD-Design Orphean/AER - Retsel 11:33:39 07/25/23 (0)
- RE: BD-Design Orphean/AER - Don Reid 11:02:16 07/25/23 (7)
- RE: BD-Design Orphean/AER - belyin 15:50:32 07/26/23 (5)
- RE: BD-Design Orphean/AER - Retsel 13:50:51 07/27/23 (4)
- RE: Great insight into AER drivers - Johno 01:14:20 07/28/23 (3)
- RE: Great insight into AER drivers - Don Reid 07:26:13 07/28/23 (2)
- RE: Great insight into AER drivers - SMathews 09:17:19 01/08/24 (1)
- RE: Great insight into AER drivers - belyin 14:06:37 01/08/24 (0)
- RE: BD-Design Orphean/AER - Johno 18:15:37 07/25/23 (0)
- BMS 4592 ND might be good to 300 Hz.... - Ivan303 09:37:52 07/25/23 (7)
- RE: BMS 4592 ND might be good to 300 Hz.... - Johno 17:38:05 07/25/23 (6)
- RE: BMS 4592 ND might be good to 300 Hz.... - tomservo 16:00:18 08/01/23 (0)
- Worse than that.... - Ivan303 06:53:39 07/26/23 (4)
- RE: Worse than that.... - Retsel 14:06:06 07/27/23 (1)
- Certainly would be my guess... - Ivan303 17:46:28 07/27/23 (0)
- RE: Worse than that.... - Johno 16:46:00 07/26/23 (0)
- RE: Worse than that.... - Cut-Throat 16:36:27 07/26/23 (0)