In Reply to: Lii Silver 10 Reference Speakers posted by weedeewop on April 25, 2021 at 08:22:30:
I have a friend who is using the silver 10s on a four x two foot open baffle with wings......loves it. Better than any speaker he has had or made before. He has now added the medium sized ESS Heil AMT on top with a copper foil cap to add a little more air and now will be mounting two 12's or 15's on each side on separate open baffle to be driven by a solid state amp and crossover. He is using a tube amp on the full range and tweet.......he is in love. He is loving the bass with the 10 by itself....but it just cannot move that much air or go that low. These drivers require at least 200 hours of loud hard playing to really break them in. By the Way, he started with the 15 inch Lii's then went to the crystal 10 and then to the silver 10. Still has all the other drivers.
YOU MUST remove the binding post that is mounted on the speaker driver. You connect your speaker wired directly to the voice coil wire.....huge difference. You can strain relieve the wire so it is reliable. Of course, you don't want binding posts on the speaker or anywhere....same with spades, bananas, etc. All sound like crap. Please check out my binding post bypass system....here:
http://tweakaudio.com/EVS-2/EVS_1200_amplifier.html
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Lii Silver 10 Reference Speakers - Ric Schultz 15:08:04 05/01/21 (2)
- RE: Lii Silver 10 Reference Speakers - Chuck 05:06:28 05/02/21 (1)
- RE: Lii Silver 10 Reference Speakers - Ric Schultz 20:41:06 05/05/21 (0)