![]() |
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: Independently from you, my experience was similar posted by Mick Wolfe on January 6, 2025 at 09:40:08:
One of my mentors who was an audio reviewer lent me one to compare with my Threshold Stasis 3 in the early 80s. The C-J reminded me of the AR AU integrated (my first "serious amp" at age 15) in that it sounded great at high output but resolution fell apart at low levels - completely unlike the Threshold.
That was a great learning experience and why I didn't keep the AR amp very long. The Dynaco PAS-3X that followed a year later taught me another valuable lesson about impedance matching. With the preamp's highish 1k ohm output, you needed high input Z amplification. Like the Stereo 120 amp used with it having a 100k value. Forget using many other SS amps like the Crown D150 used the next year having one fourth that value driving double Advents - albeit with an H-K Citation 11 that had no problem.
Gain and impedance matching are both important considerations for ideal partners.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The MV75A had an Achilles' Heel - E-Stat 15:09:41 01/07/25 (6)
- RE: The MV75A had an Achilles' Heel - DustyC 06:54:48 01/09/25 (5)
- CJ ignored the tube manual - garymuffley 12:29:27 01/09/25 (2)
- "Is it any wonder tubes did not last or fail completely?" - AbeCollins 12:21:54 01/11/25 (1)
- RE: "Is it any wonder tubes did not last or fail completely?" - DustyC 19:21:14 01/14/25 (0)
- Didn't know that - E-Stat 07:05:38 01/09/25 (1)
- RE: Didn't know that - DustyC 08:30:57 01/09/25 (0)