|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Help out a Reviewer - Adding Home Theater to 2 Channel System posted by RGA on September 20, 2017 at 19:50:59:
Actually, the HT AVRs/prepros do not have any "bypass" inputs at all. They may have analog inputs which are not digitized but are volume-controlled to the analog outputs.OTOH, there are many analog preamplifiers that have an "HT-bypass" function. See link below.
The reason is that, generally, dedicated analog stereo buffs do not want to run their highest quality signals through an AVR/prepro at all. They do, however, often want to send the front L/R signals from their AVRs through the analog stereo preamp in order to maximize sound quality for the front channels and to minimize cable swapping operations.
Edits: 09/22/17
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Help out a Reviewer - Adding Home Theater to 2 Channel System - Kal Rubinson 14:11:46 09/22/17 (2)
- RE: Help out a Reviewer - Adding Home Theater to 2 Channel System - RGA 21:08:59 09/22/17 (1)
- RE: Help out a Reviewer - Adding Home Theater to 2 Channel System - Kal Rubinson 06:04:05 09/23/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
