RE: Leaning the 1.6/1.7's back with the spacers?

Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

Posted by pictureguy (A) on October 23, 2010 at 13:43:24

In Reply to: RE: Leaning the 1.6/1.7's back with the spacers? posted by josh358 on October 23, 2010 at 10:13:48:

I'm opposed to parallel to wall setups because of backwave.......I like to give it a chance to reflect away.
Using the back of the edge strip of my 1.6s as the index, my insides are 30 1/2" from the back wall while the OUTSIDE is exactly 34" from the same surface. I'll do the math later, to compute the angle of the speakers.
I also listen to the Pole Piece side with the tweeters IN.....just so much smoother and better dispersion.
Too much is never enough

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Leaning the 1.6/1.7's back with the spacers? - krummel76 11:27:14 10/22/10 (9)

RE: Leaning the 1.6/1.7's back with the spacers? - MaggieLover 22:27:11 10/22/10 (8)

RE: Leaning the 1.6/1.7's back with the spacers? - KKM 20:30:19 10/23/10 (1)

RE: Leaning the 1.6/1.7's back with the spacers? - MaggieLover 15:40:38 10/24/10 (0)

RE: Leaning the 1.6/1.7's back with the spacers? - josh358 08:42:41 10/23/10 (5)

RE: Leaning the 1.6/1.7's back with the spacers? - pictureguy 10:03:17 10/23/10 (4)

RE: Leaning the 1.6/1.7's back with the spacers? - josh358 10:13:48 10/23/10 (3)

RE: Leaning the 1.6/1.7's back with the spacers? - pictureguy 13:43:24 10/23/10 (2)

RE: Leaning the 1.6/1.7's back with the spacers? - josh358 14:09:11 10/23/10 (1)

RE: Leaning the 1.6/1.7's back with the spacers? - MaggieLover 15:21:46 10/24/10 (0)

Follow Ups

RE: Leaning the 1.6/1.7's back with the spacers? - pictureguy 13:43:24 10/23/10 (2)

RE: Leaning the 1.6/1.7's back with the spacers? - josh358 14:09:11 10/23/10 (1)

RE: Leaning the 1.6/1.7's back with the spacers? - MaggieLover 15:21:46 10/24/10 (0)

Post a Message!