I would suggest that old tube XO may not cut the mustard! :(( ...

Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

In Reply to: MG3a Advice/Help posted by sunshdw@hotmail.com on September 17, 2010 at 09:38:24:

Googling it and getting a few specs, I see that:
* Crossover points are selectable at 50/100/400/500/800/1k/1.5k/2k/3.5k/5kHz
* Slopes are adjustable at:
- 6/12db/octave below 200Hz, and
- 6db/octave above 200Hz.

That's not particularly useful as if you want to use stock slopes, you need 18dB for the bass roll-off and 12dB everywhere else.

However, going 2-way active with a flexible active XO will IMO deliver you a much better result than the XO-1.

Regards,

Andy

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

Follow Ups Full Thread

Topic - MG3a Advice/Help - sunshdw@hotmail.com 09:38:24 09/17/10 (6)

I would suggest that old tube XO may not cut the mustard! :(( ... - andyr 15:00:20 09/17/10 (0)

Check with Jim Smith - MaggiesAndCats 12:24:54 09/17/10 (2)

RE: Check with Jim Smith - sunshdw 12:54:15 09/17/10 (1)

RE: Check with Jim Smith - MaggiesAndCats 14:00:08 09/17/10 (0)

RE: MG3a Advice/Help - Bibo01 11:35:30 09/17/10 (1)

RE: MG3a Advice/Help - neolith 13:17:50 09/17/10 (0)

Follow Ups

I would suggest that old tube XO may not cut the mustard! :(( ... - andyr 15:00:20 09/17/10 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.