|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: MGI/MGI Improved Crossover Questions posted by retrex on July 22, 2010 at 04:33:03:
My recipe for the MGI (improved or not) is the stock inductor (or replace with 14 gauge air core of same value (.66mh). For the tweeter, a 22uf Obbligato film in oil cap, a 1 ohm attenuatng resistor with a 1uf poly cap accross it to shelve up the the octave. If you don't want to attenuate the tweeter, then create 18uf worth of poly caps rather than 22uf. This won't fit under the grill cloth, but you can let the grill cloth stretch over it or cut a slit, add a board etc. etc. etc. Also, bypass the fuse and attenuator/jumper on the panel if you are comfortable (after testing changes).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: MGI/MGI Improved Crossover Questions - drkielbasa 12:17:44 07/22/10 (2)
- RE: MGI/MGI Improved Crossover Questions - retrex 04:18:01 07/26/10 (0)
- RE: MGI/MGI Improved Crossover Questions - vacs2000 14:08:21 07/22/10 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
