 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
99.61.203.208
I'm not sure if this is the right place for this question but here goes:
I have a pair of JBL EON 510 Active Speakers for being a DJ part time. I use a Microsoft ZUNE to power these self powered speakers. When I turn up the volume all the way on the Zune, it seems like the JBL Eons have more to give, but the Zune can't go any higher. My question is can I add a headphone amp between the Zune and the line in on the JBL speakers??? If so, which one would I want? I would hopefully want to keep this under $120 if possible?? Or would a headphone amp blow these things up???
Thanks in advance! Any help appreciated.
Try input 3 (the combo line/mic) switch it to line with a 1/4in. This input has gain trim and you could get a little more front end gain. It's worth a try and it's free.
Plug your Mp3 player into this and run this into the JBL EONS
Dont get the headphone amp this is what you need
ProSound Guy is right. You could also try pretty much any line-level preamp as well to see if it's a sensitivity issue between the Zune and the built-in amps in the JBLs.
WW
There is NO substitute for the live performance.
Post a Followup:
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
