![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
178.197.234.117
In Reply to: RE: N core posted by Davey on January 02, 2018 at 18:29:07
So, you don't accept that an amplifier can have distortions that would result in a boring sound? I have heard just this effect with a number of amplifiers even including some rather expensive ones like the McIntosh MC501 monos. Your claim they are just being neutral doesn't hold water with real music experience, where live almost never sounds boring. Your premise that the other amps that sound more "alive" are sounding this way due to distortion makes little sense as distortion will invariably degrade a performance not enhance it. Also, your premise implies that nearly all recordings are somehow badly missing the core dynamics of the performance and we should just accept far from an alive sound because that is what was actually recorded. My own experience with recording live performances and possession of "direct to disk" recordings shows your implication to be wrong. Many recordings are far better than the gear allows you to hear them.
If there is a dullness or as we have been saying boring sound with all recordings then how can this be right compared to an amp that shows a wide contrast in dynamics and liveliness from recording to recording?? Maximum contrast between recordings is more likely to be correct rather than a uniform "neutral" sound...this is just another form of distortion. Of course you have to believe the original premise from th OP that the benchmark amp renders the sound boring...I know I got that feeling with the benchmark DAC.
One would have thought this an easy Process to understand , I guess not .... :)
Edits: 01/03/18
It is an easy process to understand. Do you need some help with the basic concept??I believe that a power amplifier should be (as close as possible to) a straight wire with gain. How difficult is that to grasp?
I assume you disagree. That's totally fine.
My goodness.
Dave.
Edits: 01/03/18
Well you seem to know so much you are even making up my responses .. :)
The "perfect" amplifier is a straight wire with gain, Big foot is considered pretty fast and gainly ,
which have you seen ... :???
Regards
Edits: 01/04/18
I'm not sure why you're still adding your two cents in this portion of the thread.
Brad is a fella that outlines his thinking rather well. I may agree or disagree with it, but it certainly warrants reading his posts carefully. In other words, I know where he's coming from.
You, OTOH seem incapable of anything but pedantic and juvenile replies.
If you don't mind, please don't respond to any further posts I make in this thread. Thanks much.
Dave.
Excuse me for trying to communicate at your level ... :)
I had lost you way back when you couldn't grasp how loudspeaker imp/ phase affects the sound of amplfiers, why Brad wastes his time with your circular nonsense is beyond me, being a research scientist , i guess he loves the chase ...
Regards
Well, I'm not sure what the juvenile insults are all about, but you've illustrated my point perfectly.
I really don't have a clue who you are, or if you have any expertise in the audio field since you don't have the courtesy to identify yourself or even sign your postings.
And (not unexpectedly) you don't accept offline communication.
I asked you nicely previously, but I'll try again with an expanded request and ask you to no longer respond to any of my posts, anywhere.
I hope you can heed that request.
Dave.
My premise was very simply and clear.
Your post is total speculation on various other "premises" that I didn't state.
Dave.
You stated distortion is improving apparent dynamics to make the sound less boring...now THAT is really some speculation with not a shred of proof.
No I didn't. Read my previous post again.
I said I understood the premise that some folks think a power amplifier should perform that function.
You need to actually read my posts more carefully and not read between the lines. I know that's difficult for you. You had issues with that on the old Apogee forum too.
I've stated one, and only one, premise in this series of posts. If you choose to read it, then you can agree or disagree with it, that's your prerogative.
Dave.
No one has to read between the lines with your claims of "straight wire with gain" and if it doesn't sound interesting then it must be that the other amps are adding "excitement" distortion. Hogwash.
You have your credo plastered all over this thread. You are ignoring completely the listening aspect of the whole thing for essentially a view of "if it measures great and sounds boring then there is something wrong with the listener who can't handle the truth".
How is it possible for you to understand someone who thinks a power amplifier should add excitement? I don't understand this even though I think reproduced music should often not sound boring (there are of course some boring recordings...often with way too much compression). Audible distortion, either tonally or temporally, is to be avoided. The key word there is audible. If an amp sounds boring with most of a persons record collection there is likely something wrong temporally that is caused by some aspect of that product's design. Why is that premise so hard for you to accept? Because you worship the static measurements? Read some research into the validity of those measurements by Cheever, Geddes and way back Crowhurst.
You seem to fail to realize that the listener is supreme not the oscilloscope and that low measured distortion does not guarantee good sound or "true" replication of the original signal. There have been several studies showing this can easily be the case. Geddes even found a slightly negative correlation between THD and listener preference. HOW you get rid of distortion matters just as much (or more) than the distortion itself. Your understanding of these things is very superficial.
I think it was Richard Heyser who said " "Perhaps more than any other discipline, audio engineering involves not only purely objective characterization but also subjective interpretations. It is the listening experience, that personal and most private sensation, which is the intended result of our labors in audio engineering. No technical measurement, however glorified with mathematics, can escape that fact."
The "straight wire with gain" is an abstract concept. I didn't make it up, but it is (or has been) an objective for some amplifier designers to try and achieve. Certainly there are intangibles, engineering hurdles, etc, etc, that crop up along the process in producing a final (real) product. Whether those intangibles (distortions) produce a more realistic (live, boring, whatever you want to call it) audible result is open for discussion. Nevertheless, the original objective remains.....at least for some designers.
If you think the "straight wire with gain", or my belief that it is the correct objective for power amplifier design is "hogwash", then so be it.
I'm not sure why that amplifier design premise should be so difficult for you to grasp.
It's not just mine.....it's been the design premise of numerous audio amplifier designers through the decades.
Dave.
I am at a loss as to why you think I don't grasp such a basic concept and it is widely known that you didn't come up with it. Whether it is a worthy goal or not in the abstract is not much in debate...all amps should strive for the max linearity...according to the listeners. This is not as subjective as you think as there have reasonable attempts to correlate listener preference with distortion. It turns out to not be what most meter readers expect. The reason being the typical strategy for lowering distortion seems to introduce other issues, the most obvious being reduction of low order harmonics at the expense of making many more, sonically damaging high order harmonics. In other words the PATH to lower distortion is arguably more important than magnitude of the reduction. The impact is highly non-linear.
Linearity according to the scope is not weighted for the impact of those residual distortions on the listeners. Cheever and Geddes both came up with exponential weighting with increasing harmonic order. Once accounted for there is a big change in ranking for sonic "straight wire".
"all amps should strive for the max linearity...according to the listeners."
That's an interesting statement. I hope you're not speaking for most listeners. :)
I believe many listeners don't give a hoot about linearity, or distortion performance, or any other objective evaluation characteristic of power amplifiers.
I think you are, at least somewhat, in that camp as well, yes?
Your treatise on why nearly all audio amplifiers are incorrectly designed establishes your baseline on this topic. Unless you've pulled back on your premise regarding this???
Dave.
They may not care on a technical level but many of them care about it sounding more realistic. Correlating what they find more realistic with measurements IS interesting or at least should be to every audio designer... not just a demonstration of design complexity chops.
I walk the walk, having only SET at home. Linearity within the SET domain though is of interest to me, which is why I go with amps from Aries Cerat. Ultra stable and quiet power supplies and using the most linear tubes and design techniques.
Yes, unfortunately walking the walk to Aries Cerat land is extremely expensive.
Very interesting power amplifier products nonetheless, but not an example of what the audio industry should be producing nowadays. IMHO.
Dave.
Your last sentence is rather odd. Why would AC gear not be what the audio industry should be producing? Because of what? Heat? Weight? Price? The "industry" should produce the best sounding gear possible, IMO. AC represents one company's vision of what it takes to do that.
Cost, of course.
Dave.
Just the last one .... ? :)
You should request a list of acceptable amplifier designs and forward it to AC... BTW you need to give the name of at least one giant killer Class D , best of the best ...
Regards
Edits: 01/05/18 01/05/18
This post is made possible by the generous support of people like you and our sponsors: