Actually ...

Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

Follow Ups Full Thread

Topic - Turntable continuity and multimeters - George S. Roland 19:54:55 02/27/24 (22)

If you haven't done this already.... - Cougar 07:17:53 03/02/24 (2)

please take note of this post above - Story 07:34:53 03/02/24 (1)

Yes, you do need to zero out... - Cougar 07:58:29 03/02/24 (0)

RE: Turntable continuity and multimeters - samstone 11:15:23 02/28/24 (0)

RE: Turntable continuity and multimeters - samstone 11:13:39 02/28/24 (13)

My military VOM does not have a sound for continuity testing, but - alaskahiatt 16:43:09 02/28/24 (5)

Neither do my Simpson 260s. - J. S. Bach 11:41:08 03/01/24 (1)

You made me check, and you are absolutely right. . . . - alaskahiatt 15:18:27 03/01/24 (0)

That military VOM looks like it's been to war! :-) /nt\ - John Elison 12:36:08 02/29/24 (1)

Hahaha. It would be fun to know where it had been. It measures - alaskahiatt 18:27:33 02/29/24 (0)

RE: My military VOM does not have a sound for continuity testing, but - samstone 07:01:54 02/29/24 (0)

RE: Turntable continuity and multimeters - John Elison 12:57:42 02/28/24 (6)

RE: Turntable continuity and multimeters - kh6idf 16:45:15 03/01/24 (1)

RE: Turntable continuity and multimeters - John Elison 05:50:00 03/02/24 (0)

Actually ... - samstone 05:25:04 02/29/24 (3)

RE: Actually ... - John Elison 12:32:53 02/29/24 (2)

RE: Actually ... - samstone 05:27:02 03/01/24 (1)

RE: Actually ... - John Elison 14:16:36 03/01/24 (0)

In my experience, a hum is caused by a bad connection and no sound - alaskahiatt 23:31:44 02/27/24 (3)

AR wire connections - M3 lover 07:29:23 02/28/24 (1)

A short sounds like a good idea also. This might nave happened with - alaskahiatt 09:34:06 02/28/24 (0)

RE: In my experience, a hum is caused by a bad connection and no sound - George S. Roland 06:17:28 02/28/24 (0)

Follow Ups

Actually ... - samstone 05:25:04 02/29/24 (3)

RE: Actually ... - John Elison 12:32:53 02/29/24 (2)

RE: Actually ... - samstone 05:27:02 03/01/24 (1)

RE: Actually ... - John Elison 14:16:36 03/01/24 (0)

Post a Message!