|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Hagerman Piccolo Zero Headamp posted by tketcham on January 30, 2024 at 09:50:43:
you will be able to measure the tonearm/cartridge resonant frequency loading your cartridge in a conventional way vs. this low impedance way and report your findings.I see your cartridge is 18x10-6 cm/dyn compliance (100Hz). Do you know, or have you measured, what it is a 10Hz?
18 times 1.7 is 30.6. At 9.5 grams your tonearm is heavy for your cartridge so less compliance might be a good thing in your case as long as it's not too much less.
According to the chart on the Vinyl Engine you would be better off with half the compliance giving you a resonance of 10Hz vs. 7Hz.
Thanks
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
Edits: 01/30/24
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- That will be very interesting. I hope.... - Tre' 10:38:32 01/30/24 (5)
- RE: That will be very interesting. I hope.... - tketcham 12:48:17 01/30/24 (4)
- Thoughts about tonearm/cartridge resonance - 13th Duke of Wymbourne 14:37:18 01/30/24 (1)
- RE: Thoughts about tonearm/cartridge resonance - tketcham 04:12:53 01/31/24 (0)
- RE: That will be very interesting. I hope.... - Tre' 13:43:38 01/30/24 (1)
- RE: Thanks! /nm/ - tketcham 04:07:29 01/31/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
