|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: wire for a DIY passive preamp posted by charlie Butterworth on February 11, 2004 at 16:03:49:
When I built my volume attenuator I used 18AWG wire from a torn down building. I think it was part of an alarm system. It sounded pretty good for the 15 dollars it cost me. I would guess that you should build IC's out of the same wire as what you use in the preamp. I never really experimented with the wire inside, but now that you mention it I should...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: wire for a DIY passive preamp - tuneman 20:54:56 02/11/04 (5)
- Re: wire for a DIY passive preamp - charlie Butterworth 07:50:44 02/12/04 (4)
- Re: wire for a DIY passive preamp - bradp 09:39:31 02/12/04 (3)
- I agree - badman 06:33:56 02/13/04 (0)
- Re: wire for a DIY passive preamp - charlie Butterworth 13:20:11 02/12/04 (0)
- Re: wire for a DIY passive preamp - smuttner 11:56:53 02/12/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
