|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: DIY Equipment Racks, Photo's on Line ? posted by BiWired on January 23, 2000 at 13:32:27:
The only diff between my DIY equipo stands and the others mentioned below is that for the top shelf, I had 4 nuts welded to 4 flat plates measuring approx 3"X 3". I drilled the underside of the top shelf, but not all the way through. The 4 nut/plate units were screwed (4 wood screws per assembly) to the underside of the top shelf with the nut facing up and recessed into the hole in the shelf.
This leaves the top shelf totally flat and clear of obstructions.Happy DIY'ing,
john
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: DIY Equipment Racks, Photo's on Line ? - Sherwood 09:59:19 01/24/00 (1)
- Beautiful equipment/setup (nt) - wheel 12:51:27 01/24/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
