|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: What are you using for Burning in this stuff you are making? posted by NEAR SOTA on August 10, 2003 at 11:35:52:
I have never felt a need for a breakin. I just do not notice much of a change with good pure silver that is dead soft. Also, pure silver by its nature will be soft, relative speaking. If there is a break-in, it is very short. It is the alloyed metals that require the breakin, in my experience.I also use Cardas Quad Eutectic for all the signal path soldering and wonder solder for everything else.
ja in clear, humid and hot, Tucson, AZ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- With what I make and have described here. . - John PA 11:51:54 08/10/03 (1)
- agree - walter 00:22:20 08/11/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
