|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: SiIver wire Brightness? posted by NEAR SOTA on August 8, 2003 at 17:48:23:
have found that the most improtant factor is dead soft silver. I use 32 guage for my dac and transport and flat 18 wide by 30 guage thick. I used to sell these many years ago and I got great response in comparing them to anything but I have moved on from that. I have everything in my system wired with silver and if it was not wired with silver originally it is now. The only thing the signal does not travel through in silver is on the dac board and that is a very short distance.Dead soft and thin. Teflon tubing and the wire in a braided single wire/teflon configuration.
ja in slightly breezy, hot and humid, Tucson, AZ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I have used silver for years and. . - John PA 08:21:30 08/09/03 (4)
- Re: I have used silver for years and. . - NEAR SOTA 15:13:52 08/09/03 (3)
- I have used the flat silver for years and used teflon . . . - John PA 15:28:05 08/09/03 (2)
- Re: I have used the flat silver for years and used teflon . . . - SoftwireEngineer 19:19:43 08/09/03 (1)
- It's all in the details. . . - John PA 20:18:51 08/09/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
