|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Question regarding Jon Risch IC's posted by Locust Reign on April 10, 2003 at 18:35:07:
You may want to try using the Belden 89259 just as it comes off the reel. Just cut to whatever length you want, strip a little of the black jacket off, straighten out a 1/2" of the braid and twist together and solder to barrel of the RCA plug, then strip an 1/8" off the center conductor and solder to middle pin of RCA.Now don't do it in that order ...just giving you the concept. It is a lot faster, easier, and cheaper. And it sounds almost as good (like 85%+). Frankly unless your stuff is really good, or you have a critical ear, or (especially) you have a lot of electrical/radio interference in your listening room I doubt you will hear a difference.
Give the cables some time to break in and for you to get used to the new sound. After a month or two put your old ones back in and see what you think.
Good luck,
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Before you go through all that.... - Russ57 12:26:03 04/11/03 (1)
- Re: Before you go through all that.... - drumminman24 07:29:58 04/12/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
