|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Practical height for DIY equipment stand? posted by myheadhertz on December 18, 2002 at 15:39:58:
I replaced the rods on my Michael Green
Justrack with 48" long stainless steel.
I used jam nuts with no washers to secure
the shelves. The rack is very stable but
the floor is springy so you have to be
careful when playing vinyl, as the floor
vibrations will cause skips.The SCD-777ES on the second shelf from the
top is 55 lbs.Caution the picture is slow to load.
Sony SCD-777ES >> Silver Audio SB 4.0 >> AI M3A >> Silver Audio Hyacinth >> Odyssey Stratos >> Tice 416A Bi-wire >> MG 1.6QR
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Practical height for DIY equipment stand? - Jerry P 06:24:46 12/19/02 (1)
- Re: Practical height for DIY equipment stand? - myheadhertz 17:26:32 12/19/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
