|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: a question about barrier strips posted by hollywood_steve on April 17, 2002 at 19:06:09:
Hi Hollywood Steve!Good point about the gold plate being optional. I guess it depends on how humid your climate is. I've been some places where bare copper corroded with nothing more than a nasty look cast in it's general direction, so I tend to prefer gold plating, myself. However, if corrosion is not an issue, yes, a copper to copper join is preferable to a copper to gold to gold to copper join in my opinion.
Anyway, the use of spade lugs tightly screwed onto barrier strips is a form of construction that I prefer for some of my little projects, particularly loudspeaker crossovers. It's nice to be able to tweak the little buggers without having to desolder things....particularly if you mount them outside the enclosures until they're 'just right'.
All the best on your project and
Enjoy your music!
Morse
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: a question about barrier strips - Morse 21:12:35 04/17/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
