|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Since I am using Mallory CGS I guess I shouldn't worry then huh?<nt> posted by Russ57 on March 21, 2002 at 08:48:08:
but you do have to be careful, especially if it's a high gain/high feedback type amp, to make sure they are bypassed well on the board with something that doesn't degrade the sound since most installations require significant lengths of wire. My mounting straps were only as long as the capacitor radius (about 1.5 inches). I can't really speak to the exact Mallory CGS caps you are using since they come in many configurations, only that in general they are a good sounding power supply capacitor in my experience. They made another higher spec series called CG I believe that I was very fond of too, but the volumetric efficiency was much lower (and price was much higher too). They were almost completely filled with the soft tar substance and so were very well controlled mechanically.Dave
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I wouldn't worry much about the sound quality ... - Dave I 09:11:51 03/21/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
