|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: DI/O output level modification...help needed posted by dormant on March 2, 2002 at 13:20:23:
It looks as if you did the calculations correctly and then wrote down the wrong answer.
R1 = 10K
R3 = 8.45K (not the 84.7K you wrote down)
R4 = 20KBy the way, are you sure you want to have a gain of 2? That will give you a peak level of 3.4v out, which is a bit on the high side. The "standard" CD level is 2.0v and many people find that to be too high a level. I find that the a gain of 1 works fine in my system.
Good luck.
---Gary
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- small erro (was Re: DI/O output level modification...help needed) - Gary B. 16:54:49 03/03/02 (3)
- Re: small erro (was Re: DI/O output level modification...help needed) - DaveS. 08:20:27 03/04/02 (1)
- Re: small erro (was Re: DI/O output level modification...help needed) - Gary B 16:16:38 03/04/02 (0)
- Thank you , Gary. - dormant 05:30:35 03/04/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
