|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Using binding posts as "wire-to-wire clamp":Opinions needed posted by Douglas on November 28, 2001 at 12:21:50:
Hi Douglas,
I have a philips Fr 940 receiver (philips aquired marantz and then marantz started looking like older philips gear).
If these are the same "binding posts" (won't accept a banana plug and don't have a hole in the middle....) they are actually screws - and you can unscrew them (you just have to really work at it.)
I found that the Parts Express Gold Plated Speaker Terminal works quite well as a direct screw in replacement(you have to remove the posts from the terminal cup). Once screwed in, you add some solder to get a good connection and you are good to go.I just did this last weekend and it worked great, but I was really just working with the parts I had lying around.
I could be wrong about the exact posts your receiver uses, and as always YMMV.
Happy Tweaking,
Joshua
joshua@willowisp.net
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- replace the posts with good ones... - Joshua 15:13:57 11/28/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
