|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Is this what you mean? posted by Nothing on November 20, 2001 at 18:59:17:
The ALPS 100K volume pot has 6 legs (Input, Output, Ground) X Left/Right channel.
The 6 legs of the pot connects to the corresponding label I/O/G in the Amp's PCB.
My diagram is a connection for one channel from the pot to the pcb.
Inside the pot, there is two resistence, one to output and one to the ground. As follows:I--r1--O
.\
...r2
......\
........Gwhere r1 and r2 varies to produce a constant impendence to output.
Is this correct?The shunt mod can be done to replace either r1 or r2. But replacing r1 should give a better result.
Did I screw up somewhere??Many Thanks.
..Chuck T
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Is this what you mean? - Chuck T 19:46:23 11/20/01 (2)
- Re: Is this what you mean? - Nothing 20:06:21 11/20/01 (1)
- I think I got it. Many thanks. - Chuck T 21:50:49 11/20/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
