|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Batman drew the schematic and circuit diagram....... posted by Richard Parker on June 24, 2001 at 00:48:42:
The original drawing of the power/surge filter which I sent Richard shows the leads SOLDERED to the circuit breaker. After doing this version of the drawing, I discovered that P&B DOES NOT recommend soldering wires to the circuit breaker. In fact, I soldered the wires in my prototype and the CB is inoperative. I would recommend using quick disconnects on the CB.I'm sending a corrected version to Richard today. The drawing which the Inmates received with the boxes is the correct one.
I've placed a link to the P&B circuit breaker below. Look at the bottom of page two in the lower right hand corner for the warning about soldering to the CB.
Bill
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- There's an error in my original drawing! - Batman 09:54:35 06/24/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
