|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Synergistic Research Red Fuse posted by Palustris on January 11, 2016 at 14:18:09:
I hate to be the bearer of bad news but Nickel plated parts in AC applications adds a bit of harshness or brightness to the sound. Some of us have been getting as much of it out of the way as possible. I believe part of the reason is mass produced products like the fuses you mention only use the nickel to make the part shinny and non corrosive. They don't clean their plating baths very often and they become contaminated. I had some tests done on a very expensive plating analyser. The commercial nickel plate we tested looked more like Stainless steel to the analyser.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Synergistic Research Red Fuse - Mike B. 10:30:22 01/14/16 (3)
- RE: Synergistic Research Red Fuse - David Pritchard 08:22:56 01/15/16 (2)
- RE: Synergistic Research Red Fuse - Palustris 15:02:47 01/17/16 (0)
- RE: Synergistic Research Red Fuse - Mike B. 12:45:17 01/15/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]