|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Just re-read your post........ posted by Paul Tobin on November 6, 2000 at 18:20:17:
Hi Paul,Yes, it cured sibilance and in the same time sound became cleaner. I put the cap on the PCM side directly between pin 4 and 8. Now I have number of polypropylene caps on the PCB side and there is no place for another device, so I soldered cap to the top of the chip. But remember, I had bypass installed (it was helping stability). Now Black Gate is removed from the signal path, so bypass is redundant too and has been removed.
Cheers,
Mirek
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Just re-read your post........ - Mirek 14:19:25 11/07/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
