|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: To Unclestu about the ferro fluid tweak posted by unclestu on February 22, 2015 at 16:08:24:
Top photo is the common Sony KSM 2xx series.
Motor coils are large and easily accessible. Notice the larger square box is color coded copper and the two ring coils on each outboard side are coded gold. These represent the vertical and horizontal coils. All need to be soaked.
You can easily pull the motor coils to one side for greater ease of application. Even though applying from one side the ferro fluid will flow and usually equal out after a few seconds of playing (don't be surprised if sound is slightly distorted in the first few seconds.
Remember you want roughly equal amounts of ferrofluid on both sides,
Second photo is the ubiquitous Philips design CDM -12.
Motor coils are sandwiched between the magnet structure in a very tight position, Application is tricky as you need to approach from the front or rear accordingly (90 degrees to coil structure). Fluid will bleed to magnet so be prepared to wick away access
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Some photos - unclestu 12:18:53 02/25/15 (1)
- RE: Some photos - fantja 07:48:00 03/02/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
