|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: vt4c power strip chassis posted by ianm0 on July 5, 2014 at 05:00:00:
I like them and they seem a very good value. I do think, no I'm sure, the first one sized at 12mm (.47") and 18 mm ( almost 3/4") thick is a misprint. Why do I think that? A few reasons but look at the price of it and then the next smaller 4 unit PB-202-AL-S cost more and is 2mm and 3mm thick. I'd bet that the first one is 1.2 and 1.8 thick which is still good. You can also see it isn't that thick. My recommendation is NOT to put an IEC on the chassis but to hard wire the power cord to the outlets. Of course I also recommend carborundum and crystals inside like the Acoustic Revive units. Good luck!
ET
ET
"If at first you don't succeed, keep on sucking till you do suck seed" - Curly Howard 1936
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- 12mm, 18 mm? No way - Awe-d-o-file 06:35:00 07/08/14 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
