|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: bobwire and the Teac DAC posted by barryb on February 22, 2013 at 14:28:33:
No, the muse amps are already in there as the first amps out of the DAC chips, then come the 5532's. I replaced the Muse amps with the LM4562's. Which brings me to the next change. After listening for a while I could tell that the power supply was not getting it on with the new op-amps. I replaced the 2200uf/16's that I had put in at C210, 211, 310, 311. These I made 4700uf/16V. They are bigger and I had to shoe horn them in but it got done. Right off as soon as I put it back into the system it was better, more depth, smoother top end. Vocals are not at the back of the stage anymore. I can't wait until it's broke in again. Back to the sound of the op-amps and why they needed more uph. I think that these new amps are more demanding of the supply and need those bigger cap values. Looking at the data sheet I could see that the CMRR can drop as the amp is asked to do more(bandwidth and gain). The caps restore the CMRR or at least help. I think that's what is happening anyway. Someone out there may know better and maybe will fill me in. Good Luck, bobwire
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: bobwire and the Teac DAC (another change) - bobwire 12:19:06 02/23/13 (3)
- Thanks - unclestu 14:28:04 02/24/13 (0)
- RE: bobwire and the Teac DAC (another change) - hennfarm 18:48:31 02/23/13 (1)
- RE: bobwire and the Teac DAC (another change) - bobwire 19:20:10 02/23/13 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
