|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Safe Change In Main Caps In Power Amp posted by Tweekeng on February 7, 2013 at 11:50:56:
Hi Tweekeng,
Thank you for the reply and info. when the 33,000uf caps when working fine the amp on turn woukd dim the lights in the house and I could hear the tranny straining for the first few seconds, that's why I said it seems like the that power supply was near its limit/s with just the 33,000uf caps. This amp had lots of headroom and a very wide soundstage and could drive speaker that were difficult for other amps to drive. This amp had no problem driving the Carver amazing Silvers I have have. never once did it breakup.
I seen on the Partsconnexion website that these Mundorf HC caps can put out very high amounts of current but I was wonering if I could use these caps in my amp without hurting it. My goal was and still is to get the exact same cap value and voltage.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Safe Change In Main Caps In Power Amp - Cougar 14:39:55 02/07/13 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
