|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: VAC Stanndard has separate power supply with a huge amount of radiation of EMR, even though in a sealed metal posted by mschneider on April 6, 2011 at 12:11:25:
The power supply is for a four tube preamp. So i would just say it has to supply the power for the tubes. The circuit inside the preamp itself is pretty simple point to point wiring, and few doodads added in, real straight-up simple circuit. (the only complexity is the home theater pass through wiring)
The cord is permanetly attached to the body of the power supply and a multipin screwdown ring clamp is the connector at the preamp end.
Inside the Powersupply is a REALLY big old fashioned square transformer, 5" by 5" and 4" wide.. and a few medium sized caps, a tiny circuit board with a few bits on it.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I do not know if the PS is sending A/C and D/C to unit. The umbilical fixed PS end - d3vkb 15:08:05 04/06/11 (4)
- RE: I do not know if the PS is sending A/C and D/C to unit. The umbilical fixed PS end - mschneider 19:16:14 04/06/11 (3)
- The PSu is a sealed case already. It gets warm but not hot. - d3vkb 19:31:24 04/06/11 (2)
- RE: The PSu is a sealed case already. It gets warm but not hot. - Say 17:22:45 04/07/11 (1)
- I saw the Marantz video woth the A/Ccopper pipe - d3vkb 17:45:15 04/07/11 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
