|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Tweakorama: Super Black Hole, Ioniser, AHP 2 fuses, FI-03(G) inlet and q. about burn-in posted by solda on January 17, 2011 at 17:00:54:
The CBFs were out (of the inside of the equipment) for about the 2 hours that were needed to get the inlets installed. I'm still not too clued up on how these things are supposed to go through break-in and eventually 'settle'.
My concern might be to do with material combinations of the connectors and inlets. Straight from the fusebox I have a Furutech outlet box with gold sockets, then VenHaus 2s with copper connectors on both ends followed by the gold inlets with gold fuse holder and copper fuses. I've just been reading a fair bit by Duster on the subject and wonder, if he's reading this, if I just have overdone it with the gold/copper combo.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Don't know about CBFs, but pinging Duster on inlet burn-in/metal issue - Japesgalore 03:19:30 01/18/11 (2)
- RE: Don't know about CBFs, but pinging Duster on inlet burn-in/metal issue - Duster 10:35:40 01/20/11 (1)
- RE: Don't know about CBFs, but pinging Duster on inlet burn-in/metal issue - Japesgalore 18:12:23 01/20/11 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
