|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Interesting posted by Charlie8521 on November 8, 2010 at 17:38:52:
You're welcome my friend.
"An interesting option would be to see if I can find individual connectors for 0.0256 pins that would connect to the male connector pins. Have not found anything yet."
I too had the same thought and that is if I could just find individual connectors for each pin, that would be it. Alas, all I found, at least in my neck of the woods, was what is pictured.
The problem I discovered is that the tension on the female tongs was not that secure and would weaken with the slightest movement thereby ensuring a compromised connection. My subsequent thoughts were to obtain very small o-rings to slip over the female tongs to retain the tong tension but the project was abandoned and instead I went with the connector pictured in my initial reply.
~
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Interesting - kenster 19:21:04 11/08/10 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
