|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: OK, I made the boxes again w/ non-ferrous case posted by Jon L on November 2, 2009 at 13:51:04:
formed by the outlet back straps and the metal box. Replace one of the two fixing screws with Nylon, and slip a Nylon washer between the outlet and the box.
The outlet back straps and metal box form a one-turn transformer with the hot and neutral AC wires that pass on either side of the strap. Current delivered by the outlet causes current to flow through the back strap and box unless you break the loop.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- OK, now try breaking the conductive loops - Al Sekela 14:39:59 11/02/09 (3)
- Nylon screws..where? - Jon L 18:08:35 11/02/09 (2)
- Home Depot used to have them. - Al Sekela 14:57:20 11/03/09 (0)
- OSH or an electrical supply store nt - bartc 19:24:19 11/02/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
