|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Mundorf? posted by Zatoichi on October 8, 2009 at 14:45:22:
Follow the trace to all the components that the cap lead connects to. Generally the neg end of a cap in the PS goes to ground. Look at the connecting part to determine its function i.e., if it goes to a rectifier tube it is a power supply cap. If it goes to a cathode resistor, then its a cathode cap. You will need to check your tube manual for tube socket connections and you may need to remove the PC board from the chassis to see both sides in order to follow a trace.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Mundorf? - Palustris 15:49:06 10/08/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
