|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: JD100 Output Levels posted by thc on March 12, 2009 at 07:02:37:
I don't find my jd-100 particularly loud, but if you do, you can try substituting 5751 tubes for the 12ax7's. 5751s have 70 % of the gain of the stock 12ax7 output tubes, and sound great.
If that is not enough,I would definately attenuate the gain somewhere else in your system rather than the source,--perhaps your amp has excessive input sensititivity, for the preamp's output, your volume pot taper has too much gain at low settings, etc. I find that most preamps have way too much gain for line level sources, especially if your speakers are efficient.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: JD100 Output Levels - csintx 19:56:56 03/19/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
