|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: replacing 1N4003 with better diode at power amp stage...advices pls posted by kalido on February 25, 2009 at 17:23:22:
Wired to keep the amp output between the +/- rails, where it should notmally be.
If these diodes ever conduct the amplifier is out of control (so will be your ears!) usually as a combination of overload plus a severe reactive load. There are other fault conditions which could provoke this.
Since they are not power rectifiers or (normally) switching you may conclude that there are other more rewarding components to be tweaked.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- These are protection diodes. - clifff 08:25:08 02/26/09 (1)
- RE: These are protection diodes. - kalido 15:01:40 02/26/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
