|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: It is a full wave rectifier posted by rick_m on September 22, 2008 at 08:16:16:
Yes, they are ground referenced and do use the ground path for current, which does go against what I just said about AC currents in the ground, but most good sounding audio designs do become a hodgepodge of compromises in the end :)
The regulators are a simple design using an isolated voltage reference, the high voltage I/V and output stage reg using the chokes for the series element, with the 5V D/A convertor reg using an additional series resistor, and also supplies power to the control chip.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- shunt regulators - Slider 08:36:34 09/22/08 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
