|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Where to buy aluminum extrusion to make stand frame? posted by michaelv20850 on March 19, 2008 at 15:03:00:
Most of the posts have a hole in the center that will need to be drilled and tapped for whatever thread pitch you will use.
Many of the manufacturers of extruded t-slot frames will offer both metric and standard sizing, and the center bore will generally accept either a self tapping screw or be easily threaded (it's aluminum) to match either metric or standard. In other words: if it's a metric t-slot, you can pretty easily use a metric screw or bolt - if it's a standard t-slot, a standard screw or bolt will work. They will generally recommend a specific thread diameter and pitch for use in the central bore, such as M6-10 or 1/4"-20tpi.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Where to buy aluminum extrusion to make stand frame? - yotacowboy 17:21:35 03/19/08 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
