Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

From DIY to manufacturer

Both were DIYers. Chris graduated to being a manufacturer/supplier, while I'm not sure about Bob's trajectory.

There are others here who post various configs that they've developed from DIY. I'm not sure if Moray James started there, but he has good designs as does Alan Maher (audionutge). I've not seen their designs in detail, just read about it and corresponded with both, who are helpful and knowledgeable.


BTW, he has the 10 AWG custom quad cable that he recommends for both speakers and for heavy wattage draw PCs. How he figures you use that quad design with a ground I do not know. But you can always ask Chris directly and he's very good and honest about responding.

So as to your original question, I've got no answer to give that's worth much. But I do like Chris' designs and have 2 of them now. I also like Alan's designs, but settled on only one. Have not tried JR's PC. Have used commercial SOOW, SJOW, and standard jacketed 12 AWG 3 wires too. All work, but I've not juggled the ground wire situation, much less the placement, so have no empirical information to impart. In fact, my system is almost exclusively 2 wire anyway, so the impact of ground wires is only where I have a one side grounded shielding config, unless I'm mistaken. That might make any suggestion from me irrelevant to your situation.


This post is made possible by the generous support of people like you and our sponsors:
  WEET Music Caps  


Follow Ups Full Thread
Follow Ups
  • From DIY to manufacturer - bartc 06:00:47 09/01/07 (1)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.