Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

Pic of the R-C Network




Your orientation is correct regarding polarity (negative wired to the resistors, positive from the caps). The formula I used is based on Al Sekela's experimenting and suggestions. I am currently experimenting with these networks and have built 14 of them so far using different materials (other then the recommended caps and resistors by Al Sekela). By the way, using different wire, solder, damping, termination/spades, shielding vs non-shielded all makes a difference. Here is Al Sekela's cap and resistor recommendation and what you see in the pic:

* three 3650pf Silver Mica caps to one PRP 10ohm resistor
* one 360pf Silver Mica cap to one PRP 10ohm resistor
* one 36pf Silver Mica cap to one PRP 10ohm resistor

Chris

This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]