![]() |
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Source or Power Amplifiers with Oyaide WPC-XXX? posted by adjieda on August 22, 2007 at 06:11:35:
"The item has arrived, and it is the wall plate with the SWO-XXX included. It looks simple. Do I need to have soldering skills?"
Great! The wall plate/outlet are easy to install and require no soldering skills. There should be an installation guide with the WPC-Z/SWO-XXX.
Just remember to turn off the CB that feeds the outlet that will be replaced and then verify it has no power via a DMM or a small lamp before beginning the installation.
It is also a good idea to cut about 1 inch off of the existing wires, strip back about 1.5 inches of insulation, and then polish the exposed copper with 2000 grit sandpaper. Some people also like to apply contact enhancer to the exposed copper before attaching the wiring to the outlet but that is entirely up to U.
As always, if U R not comfortable or are apprehensive about working around electricity, ask questions here or have a licensed electrician do the installation.
Cheers and enjoy,
~kenster
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Source or Power Amplifiers with Oyaide WPC-XXX? - kenster 07:47:48 08/22/07 (6)
- RE: Source or Power Amplifiers with Oyaide WPC-XXX? - adjieda 09:17:03 08/22/07 (5)
- RE: Source or Power Amplifiers with Oyaide WPC-XXX? - kenster 16:31:40 08/22/07 (4)
- Very nice.. Very clean.. Very clear - adjieda 11:55:22 08/25/07 (3)
- RE: Very nice.. Very clean.. Very clear - kenster 22:17:56 08/25/07 (2)
- Wow.. even better after burn in - adjieda 08:53:58 08/29/07 (0)
- RE: Very nice.. Very clean.. Very clear - adjieda 11:18:48 08/26/07 (0)