|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I have some Wima FKP-1 caps rated at 0.1uF 1600Vdc/650Vac that I want to try, I know the voltage values are fine but what about the 0.1uF value (or .2uF with in parallel).. Would this work better than the .47uF? I'm a newbie to this tweak and just want to make sure that its OK from other more experienced modders here. I have done the Auricap tweak on my Preamp and it sound very nice now. I can remember if I seen something about putting too many of these caps on the AC line would cause some negative affects? Any info/help will be greatly apperciated.Thanks
This post is made possible by the generous support of people like you and our sponsors:
Topic - Auricap tweak, does the cap value have to be .47uF? - Cougar 13:54:10 01/14/06 (12)
- No such thing as the ' Auricap tweak' - pmkap 17:42:05 01/15/06 (11)
- Re: No such thing as the ' Auricap tweak' - pburke 06:45:47 01/16/06 (10)
- Actually...... - pmkap 07:45:58 01/16/06 (9)
- Re: Actually...... - wdi 12:52:00 01/16/06 (8)
- The problem is not a dead short, the problem is - Al Sekela 16:16:19 01/17/06 (6)
- Re: The problem is not a dead short, the problem is - wdi 21:15:51 01/18/06 (5)
- Re: The problem is not a dead short, the problem is - Glen B 10:57:55 01/19/06 (4)
- Not to mention the dust bunnies - Al Sekela 16:15:39 01/19/06 (3)
- Re: Hot Box - benie 23:12:50 01/19/06 (2)
- No, local switching transients are small compared to what's on the line... - Al Sekela 19:51:24 01/20/06 (1)
- Thanks AL. - benie 00:06:14 01/21/06 (0)
- Its not my place to act 'in loco parentis'..... - pmkap 14:47:01 01/17/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
