|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: 4-gang pot or stepped attenuator wanted posted by tal on November 28, 2005 at 21:28:47:
I built a 2 deck 23 position stepped attenuator for about $50, but I have enough parts left over to turn it in to a 4 deck if I wanted. I bought an ALPS 4 deck 23 position make-before-break switch from triode electronics, and a resistor kit from digikey. I forget the exact prices of everything but I think the switch was like $20 and the resistor kit was about $15. Add a couple bucks for a box and some female RCAs, a little bit of solder, and a couple hours sucking flux fumes and you got yourself a great quality stepped attenuator.Mine sounds great and works like a charm!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- DIY for about $50 - Chris_F 04:55:02 11/30/05 (1)
- I should add... - Chris_F 05:00:29 11/30/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
